That was my first big problem then second one I got stuck in DOS and it was my own fault I left a disc in the driver. The source of the trouble was not the media in this case, but the device. I guess (and keep in mind, I am not there looking at what's happening) the easiest and cheapest ‘fix' might be to use another machine to copy the Vista Install disc The most common is F2. my review here
Note that performing a System Restore will only affect Windows system and application files. If you would like to contract my help resolving your computer problem, see Aplus Computer Aid. Newer Windows PCs and laptops use something called UEFI/EFI that can interfere with booting from recovery CDs and USBs. Power On Self Test (POST) Performs initial hardware checks, such as determining the amount of memory present Verifies that the devices needed to start an operating system, such as a hard
You can also try booting into Safe Mode (press F8 repeatedly) and then using System Restore to "go back" in time to when it worked. That worked once and the install resumed. How to test a computer CD-ROM or DVD drive for failures. Click OK.
Totally work the money.On another note. In some computers if the CD has priority over the harddisk it really needs a bootable CD to be present. LikeLike Comment by Dan | June 26, 2011 | Reply Dan, The best tool for the job is the one you say will not boot - that is troubling. Windows Xp Won't Start In Safe Mode It is free but be sure to donate to him if his product helps you.
There are programs for sale which can recover lost passwords from Vista and get you back in to your machine, or you can contact a professional support tech for help. As your failsafe. You can generally find this information on the pages you see when the computer is booting up (before the login page is supposed to appear). https://www.cnet.com/forums/discussions/help-during-my-pc-boot-up-it-displays-please-insert-disk-598525/ The key to enter Setup should be listed on the very first page (my listing is at the bottom) and this is also when you want to click on it.
These pages usually scroll by rather quickly, so you may have to keep rebooting until you see the Safe Mode key listed. Windows Xp Not Booting In Safe Mode I apologize for bothering you . Additional information See our CD-ROM, DVD, and Blu-Ray definitions for further information and related links on these terms. First you need to use the up/down arrow keys to highlight the device (CD-ROM) and then use the +/- keys to move it up to top place (note: you may be
I have worked on motherboards before that would only boot from the CDROM drive if it was connected to the primary IDE connector. And, not really pertinent to you, but I feel compelled to say it.. 3) I don't get "big bucks". Windows Xp Startup Repair After correctly giving priority to the CD/DVD over the local hard disk, you will need to save changes and exit. Windows Xp Won't Start LikeLike Comment by techpaul | January 4, 2012 | Reply Hi My Laptop has just crashed.
Then during all the re-boots, it decided not to re-boot on the last one. http://agileweb.org/windows-xp/win-xp-f-drive.php i have 5.68g hard drive LikeLike Comment by Thomas | March 28, 2009 | Reply Thomas- I reacted at first with my SOP answer which is: if the BIOS is indeed If you have just one Windows installation, type 1 and press enter. got some problem with my computer. Windows Xp Not Starting In Any Mode
LikeLike Comment by techpaul | December 26, 2008 | Reply […] reboot the computer. Related August 3, 2007 - Posted by techpaul | advice, antivirus, BIOS, computers, hardware, how to, PC, tech, Vista, Windows, XP 160 Comments » but i hve mercury motherboard then what IDE Drives I have seen the ribbon cable go bad on many IDE hard drives. get redirected here Select Intel Select Analyse Here it will often tell you errors with the partitions (like invalid sector counts) or show bizarre partitions that may be overlapping or corrupted in the partition
So hopefully it is less than a year old and still under basic warranty -- my advice, call the manufacturer. Cd Drive Not Reading Disc You don't want to compromise your new hdd!Of course, the final option, take it to a good shop. Transfers control to the executable code in the boot sector.
If you're unable to boot from the CD or DVD, please refer to the dedicated article in our knowledgebase on troubleshooting problems booting from CD or DVD. I just can't be paying someone every 6 months when this same problem occurs. Every week I fix unbootable XP computers. Start Windows Normally Problem Xp I don't want to format the hard drive asI don't want to lose my data.
Let me just say at this point that your data on the hard drive may be in jeopardy. I figure I can download what is needed from Microsoft. In some BIOS's, you hit esc to ‘exit' and then you will be asked, "Save your changes? useful reference But is seen on the side screen like this: +- Select Boot devices Select menu || Select Item Enter Select > Submenu F1= HELP F9=Setup Defaults F10=Save and exit Esc =
I have an old HP (more than 10 yrs old) that runs great! (believe it or not) but it runs a little slow, which is why I was given this one. This is a computer I inherited with a legit XP version but I don't have the CD (altho I have the installation key). That will bring up the boot menu. 0Votes Share Flag Back to Hardware Forum 30 total posts (Page 1 of 3) 01 | 02 | 03 Next Search Start Now, Windows XP will hang up when it encounters the error and with any luck, it will display a stop message you can use to diagnose the problem. #9: Restore from
I was slow catching that you are the same Alan as posted much earlier. (Not enough coffee?) Most new PC's have an F key option for selecting the Boot order, shown Check that the ribbon cable is properly seated in the socket on the hard drive. What d you think is the problem? whern I start it it doesnt get as far as the BIOS Screen so hitting a key does not help.
During my PC boot up, it displays 'P by osama khater / August 9, 2013 5:16 PM PDT In reply to: Disk Boot Failure - Insert System Disk Troubleshooting Outstandind. Do you know how to fix this? How to add a deep chasm-type hazard to an encounter without risk of instant death to PCs? share|improve this answer answered Nov 3 '13 at 12:49 gedO 245 The HD set to slave mode is (in terms of booting) effectively the same as removing the HD
Pinging is currently not allowed. 15 Responses to “XP Won't Boot :( Repair Series Part 1: POST and MBR Issues” K1 • April 21st, 2013 at 11:38 am Thank you for If it is not, then we need to find out why. If it is there, you move it to the top of the list. It is hard to find good people out there like you that take the time to help someone out…Dan LikeLike Comment by Dan | June 28, 2011 | Reply Dan, Maybe
you can try the methods described here, https://techpaul.wordpress.com/2009/01/27/how-to-cure-a-malware-infection/. (You will need access to a non-infected machine.) After that, you will want to run HiJack This! Here are the errors I see most often and some tips on how to repair them. Additional information on bootable disks can be found on our boot disk page. on Google, type in HP Pavillion 443SD change boot order. (Or go directly to HP Support and enter Pavillion 443SD change boot order.
Any suggestions? Hope your not recommending Best Buys, I have already seen their pro staff years back and was not impressed.
© Copyright 2017 agileweb.org. All rights reserved.