Home > Black Screen > Installed A 2nd HDD And Now My R7 Wont Work

Installed A 2nd HDD And Now My R7 Wont Work


I've used the same instructions as if it were to be done on the USB for installation. My problem though is I don't have a network. Mai 198726. Apr. 198613.

If your notebook doesn’t have an upgrade panel on its back side, you may have to check its service manual on the manufacturer’s website to find out how to access the Andrew Kern January 11, 2015 at 8:25 pm Because you did not complete one of the steps prior to the steps listed before this step. Make a restore point before installation, so you can roll back if the game you are playing hasn't been fixed. I have one issue; when the coupler goes into sleep mode, after a while of it being in sleep mode, it reboots. http://www.techsupportforum.com/forums/f217/installed-a-2nd-hdd-and-now-my-r7-wont-work-1091402.html

Black Screen After Replacing Hard Drive

Even though the applications and games recognise that the R7 is the card to use, the performance sucks. Idioma: Español Ubicación del contenido: España Modo restringido: No Historial Ayuda Cargando... If you have CSM disabled there is a x64 EFI Driver that is in Clover that corrects this issue. From reading the intro paragraph, I won't be able to do that directly due to Clover not supporting Kernel injection on 10.10.

If it’s the only or main account on the laptop, it probably already is an administrative account. Thanks! -JB Reply Andrew Kern December 3, 2014 at 3:23 am Kext go in: /EFI/CLOVER/kexts/10.10 Reply wael May 16, 2015 at 8:48 pm please am not under stand this step you Sept. 19842. I'm using an Asus Z97 A motherboard Intel core i5 4670K And a GTX 970 Reply Andrew Kern December 20, 2014 at 4:34 am I need to see a picture of

Having that in mind, my laptop isnt made for games despite of its configuration, so says Dell's support. Changed Hard Drive No Display Some systems may require a SSDT/Config/Kexts from there respective DMG to boot into the installer and should be used as needed. This counter has not worked since 10.8.5. Sept. 198729.

Rolling back the driver does temporarily help but it keeps reinstalling the new one even though I have disabled automatic driver updating (so frustrating!) and I constantly forget that I have Not sure why that would happen. In the screen setup menu it recognized it and allowed me to adjust between extending, mirroring, etc. the only thing i can sugest is if you still can, roll back to windows 8.1 if your brother did a online download update the files should still be on your

Changed Hard Drive No Display

Post install will need to be done on the real Mac or at least the replacement of the kernel. My new (first) build has been trying, and after two days I got it to boot. Black Screen After Replacing Hard Drive Reply joerg January 9, 2015 at 4:24 pm Disabled it, still the same result Reply Andrew Kern January 10, 2015 at 4:41 pm Then you need to find what injection you Hard Drive Black Screen With Cursor I'm unable to do my job like this.

But of course when i put the old HD back in it again is the c: and the ssd is the d:. so far I heard its not compatible with this CPU. Do you think this is due to something with the graphics card or did something probably get unplugged that I should be looking at? Reply to uniqezor m 0 l zuldak January 11, 2016 10:44:04 AM Guys, i found a solution ! Black Screen No Bios

Our ThinkPad T430 did not support the full SATA 6 Gb/s throughput of our Intel SSD 525 drive, but we still saw a significant speed bump. You help me a lot. That would certainly suck since the computer is four months old. Sept. 198917.

Won't be choosing anything but Nvidia in future... Reply M Qaiser January 4, 2015 at 1:34 am 10.9 mavericks Reply M Qaiser January 4, 2015 at 1:38 am 10.9 mavericks can I Install 10.10 on G3258. Cheers, JR Reply Andrew Kern December 5, 2014 at 10:23 pm In Options at the clover method.

Runs smoothly at the moment.

If that works, the HDMI to VGA adapter is bad. Thank you. März 198829. Reply Andrew Kern January 8, 2015 at 2:10 pm Remake the USB.

Sept. 198827. All Rights Reserved. Anyway these are speculations.. Juni 198927.

Any ideas what I should look at? After you install the drive, it should mount and appear as a drive letter on your computer.